KI WireWorks, Руководство по сборке

Страница: 32 / 48

30
WireWorks
®
Panel System
Assembly Instructions
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Data Cabling Behind Acoustic
Tiles (continued)
2. To support wires in the middle of
larger panels, use an acoustic tile
horizontal cable support. To
install; align the rectangular
projection on the top of the wire
support with the rectangular hole
in the horizontal. Push the wire
support through the horizontal
and rotate it one-quarter turn to
lock it into place. If support is
required for other wires, the wire
supports can be ganged by using
the rectangular hole in the bottom
of the wire support. The method
of ganging is identical to
attaching to a horizontal rail
(Figure 42).
3. When the necessary wire guards
and supports are installed, lay
the cabling in place behind the
guards and supports (Figure 43).
4. Refer to table below for
recommended cables behind
each tile.