KI WireWorks, Руководство по сборке

Страница: 36 / 48

34
WireWorks
®
Panel System
Assembly Instructions
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Hanging Acoustical Tiles
Acoustical tiles have slots in the
back to accept the tile hooks.
1. With the tile hooks already in
place on the frame (See Installing
Tile Hooks on page 14), hang
the tile on the top two hooks
(Figure 50).
2. Hold the top of the tile against
the frame and gently lift up on the
bottom of the tile while pushing it
in toward the frame to engage the
bottom hooks. Let the tile
slide down into position while
continuing to support it against
the frame (Figure 51).
3. After the tile is hung, pull the
tile away from the frame on all
corners to ensure that all four
hooks are engaged.
Note: Tiles can be rotated and
still hung on the panel frame. For
example, a 24” x 24” tile can be
hung with any edge as the top.
When fabrics are directional, you
must orient the tile correctly to
achieve the correct visual
appearance. All tiles have the size
marked on the back of the tile.
This mark is along the edge that
the factory considered the top
while the tile was being
upholstered.