KI WireWorks, Руководство по сборке

Страница: 14 / 48

12
WireWorks
®
Panel System
Assembly Instructions
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Attaching Enhanced
Horizontals To Verticals
(continued)
4. Position the lower enhanced
horizontals relative to the lowest
set of embossed areas on the
vertical posts with the opening
downward and tap into place
with a dead-blow style mallet.
Continue to add standard
horizontals as required by the
style of panel (Figure 13).
Note: Remember, only the
bottom horizontal rails are
installed with the opening
facing downward. All other rails
openings should face upward.
Warning: Use care when
tapping the horizontals in place to
ensure that all rivets are sliding
into the embossed areas of the
post. Failure to engage all rivets
into the post will compromise the
strength of the frame and could
possibly result in product failure.