WireWorks
®
Panel System
Assembly Instructions
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
9
4. Position the lower horizontals
relative to the lowest set of
pockets on the vertical posts with
the opening facing downward and
tap into place with a dead-blow
style mallet. Continue to add
horizontals as required by the
style of panel (Figure 7).
Note:
Remember, only the
bottom horizontal rails are
installed with the opening
facing downward. All other rails
openings should face upward.
Warning:
Use care when tapping
the horizontals in place to ensure
that all rivets are sliding into
the embossed areas of the post.
Failure to engage all rivets into
the post will compromise the
strength of the frame and could
possibly result in product failure.
Содержание WireWorks
Страница 1: ...Assembly Instructions WireWorks Panel System January 2020...
Страница 2: ...A...
Страница 46: ...44...
Страница 47: ...45...