KI WireWorks, Руководство по сборке

Страница: 39 / 48

WireWorks
®
Panel System
Assembly Instructions
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
37
Installing Top Caps
Top caps snap over the top
horizontal rail and are the same
width as the panel.
1. Align the cap over the top
horizontal rail and firmly snap it
down into place (Figure 58).
2. When top caps are adjacent to
each other, slide the supplied top
cap splice plate between the top
caps to help keep them properly
aligned (Figure 59).
Hint: To remove top caps, press
down in the center of the cap
while lifting up on the edge
(Detail O).