KI WireWorks, Руководство по сборке

Страница: 9 / 48

WireWorks
®
Panel System
Assembly Instructions
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
7
Rules for Building
Intersections
1. Determine quantity of connector
blocks by referring to
Number of Height-Change
Connectors chart.
2. Determine quantity of connector
blocks by identifying the shortest
panel in your intersection. Refer
to corresponding chart.
3. Determine quantity of
height-change connector blocks
by subtracting heights of the
two shortest panels. Refer to the
chart for order quantity. If your
intersection includes more than
two different heights, repeat this
process for all heights.
Hint: Start with shortest panel.
Use height difference between
shortest and next tallest, etc.
Sample
You Need (Refer to Figure 3)
Shortest panel
30” = 2 connector blocks
Second shortest panel
54”-30” = 24” or 2 height-change
connectors
Third shortest panel
66”-54” = 12” or 1 height-change
connectors
Tallest panel
84”-66” = 18” or 2 height-change
connectors
Total
2 connector blocks
5 height-change connector blocks