Kärcher BR/BD 90/140, Руководство пользователя

Страница: 22 / 292

22
English
Î Select the menu item "Accept default
values?" in the operator menu by turn-
ing the Info button
Î Press Info button. The factory settings
of all parameters are restored for each
cleaning program.
The table given below gives details of the
factory settings of the parameters for the
cleaning programs. If no values are en-
tered, then the respective parameter can-
not be set in the given cleaning program.
Î Activate the switch for detergent dosing.
Detergent gets added automatically.
Note
You can set the detergent dosing in the Op-
erations menu.
Note
As soon as the detergent pump starts run-
ning, this is indicated through a blinking "C"
in the display.
To improve the vacuuming result on tiled
floors the vacuum bar can be turned to an
oblique position of up to 5°.
Î Loosen crossh-handles.
Î Turn the vacuum bar.
Î Tighten the cross-handles.
If the vacuum result is unsatisfactory the in-
clination of the straight vacuum bar can be
modified.
Î Release the wing nuts.
Î Tilt the vacuum bar.
Î Tighten the wing nuts.
Note
Overflow dirt water tank. If the dirt water
tank is full, the suction turbine switches off
and the indicator lamp "dirt water tank full"
begins to blink. All cleaning programs with
suction are blocked for one minute. Empty
the dirt water reservoir.
몇
Warning
Please observe the local provisions regard-
ing the wastewater treatment.
Î Take the water discharge hose from the
support and lower above a suited col-
lection device.
Î Let off dirt water by opening the dosage
device at the discharge hose.
Î Rinse the dirt water tank with clear wa-
ter.
Î Remove the suction hose coupling for
draining off the fresh water and hold it
over a suitable container.

Danger
Risk of injury! When loading or unloading
the machine, it may only be operated on
gradients of max. 10%. Drive slowly.
Î If you want to transport the machine on
a vehicle secure it from slipping using
belts/ ropes.
Reset parameters
Adjustable
parameters min:step:m
ax Remark
Water quanti-
ty 1:1:8 1=min.,
8=max.
Dosing equip-
ment for de-
tergent
(optional) 0,5%:0,5%:
3% 0.5=min.,
3=max.
Brush pres-
sure 0:1:8 0=min.,
8=max.
FACT (brush
speed) – Power
Clean,
Whisper
Clean,
Fine
Clean
Brush rotation
time after stop 0s:1s:3s From
idling to
lifting
Working
speed 1:1:8 1=1km/h,
8=6km/h
Factory setting
W
ater qua
n
tity
Brus
h
pre
ss
u
re
Wo
rki
n
g
spe
ed
Scrubbing suc-
tion 5 4 4
Wet scrubbing 5 4 4
Dry vacuum
cleaning – – 4
Polishing – 4 4
Polish suction – 4 4
Dos
in
g
eq
ui
pme
n
t for
detergent (optional)
FA
CT (br
u
sh
spe
ed
)
Brush rotation
ti
me after stop
Scrubbing suc-
tion 1% P 2s
Wet scrubbing 1% P 2s
Polishing – P 0s
Polish suction – P 0s
P=Power Clean
Switch on the dosing equipment
for detergent (optional)
Setting the Vacuum Bar
Oblique position
Inclination
Empty tanks.
Drain off dirt water
Drain off clean water
Transport