KAESER M27, Руководство оператора

Страница: 72 / 294

Fig. 19 Towbar height adjustment rb/rm/rs
1,2
Split pin
3,4
Locking lever
5
Serrated joint 1
6
Serrated joint 2
7
Towbar tube
8
Towbar adapter
9
Towing eye
10
Ball coupling
11
Split pin (securing principle)
12
Overrun damper
13
Parking brake
1. Draw out the split pin
1
.
2. Undo the locking lever
3
until the serrated joint
5
is disengaged.
3. Make the angle adjustment to the serrated joint
5
.
4. Tighten the locking lever
3
making sure the serrations engage.
5. Draw out the split pin
2
.
6. Undo the locking lever
4
until the serrated joint
6
is disengaged.
7. Adjust the angle of the serrated joint
6
to bring the towing eye or coupling parallel to the
ground at the height of the towing vehicle hitch.
8. Tighten the locking lever
4
making sure the serrations engage.
9. Check that the tow bar is adjusted to the correct height.
Check if:
■ the towing eye
9
or coupling is at the right height and parallel to the ground,
■ the serrated joints
5
and
6
are fully engaged,
■ The locking levers
3
and
4
are tightened.
10. Make sure the locking levers
3
and
4
are tight by striking with a hard rubber hammer.
11. Insert the split pins
1
and
2
.
6 Installation
6.4 Adjusting the chassis
62
Operator Manual Screw Compressor
M27
No.: 9_9548 05 USE