manualshive.com logo in svg

KAESER M27, Руководство оператора

Поделиться
Скачать
KAESER M27 Скачать руководство пользователя страница 63

Fig. 14 Minimum distance from excavations/slopes and walls

1. Keep sufficient distance (at least 5 ft) from the edges of excavations and slopes.
2. Ensure that the machine is as level as possible.

The machine can be temporarily operated on a slope of not more than  5° .

3. Ensure accessibility so that all work on the machine can be carried out without danger or hin‐

drance.

4.

 Danger of burning from build up of heat and hot exhaust.

Insufficient distance from a wall may well cause heat build-up that could damage the machine.
➤ Do not position the machine directly against a wall.
➤ Ensure always sufficient ventilation space around the machine.

5. Position the machine as far as possible from any wall.
6. Ensure there is enough free space all round and above the machine.
7. Keep air inlet and outlet openings free of obstructions so that the cooling air can flow freely

through the machine.

8. Place the machine in such a manner that

■ wind does not blow into the cooling air outlet.
■ exhaust gases and heated cooling air can not be drawn into the compressor.

5

Installation and Operating Conditions

5.2

Installation conditions

No.: 9_9548 05  USE

Operator Manual    Screw Compressor   
M27  

53

Содержание M27







































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды