manualshive.com logo in svg

KAESER M27, Руководство оператора

Поделиться
Скачать
KAESER M27 Скачать руководство пользователя страница 12

These show the kind of danger and its source.

The possible consequences of ignoring a warning are shown here.

If you ignore the warning notice, the "DANGER" signal word indicates a lethal or severe in‐

jury will occur.
➤ The measures required to protect yourself from danger are shown here.

Warning notes referring to a sub-section or the subsequent action are integrated into the procedure

and numbered as an action.
For example,
1.

 These show the kind of danger and its source.

The possible consequences of ignoring a warning are shown here.

If you ignore the warning notice, the "WARNING" signal word indicates that death or severe

injury may occur.
➤ The measures required to protect yourself from danger are shown here.

2. Always read and comply with warning instructions.

1.4.2  Potential damage warnings

Unlike the warnings shown above, damage warnings do not indicate a potential personal injury.

Warning notices for damages are identified by their signal term.

Signal term Meaning

Consequences of ignoring the warning

NOTE

Warns of a potentially dangerous situation Damage to property is possible

Tab. 2 Danger levels and their definition (damage to property)

For example,

These show the kind of danger and its source.

Potential effects when ignoring the warning are indicated here.
➤ The protective measures against the damages are shown here.

➤ Carefully read and fully comply with warnings against damages.

1.4.3  Other alerts and their symbols

This symbol indicates particular important information.

Material Here you will find details on special tools, operating materials or spare parts.

Precondition Here you will find conditional requirements necessary to carry out the task.

The conditions relevant to safety shown here will help you to avoid dangerous situations.

➤ This symbol is placed by lists of actions comprising one stage of a task.
1. For instructions with several steps ...
2. ... the sequence of actions is numbered.

1

Regarding this Document

1.4

Symbols and labels

2

Operator Manual    Screw Compressor   
M27  

No.: 9_9548 05  USE

Содержание M27







































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды