manualshive.com logo in svg

KAESER M27, Руководство оператора

Поделиться
Скачать
KAESER M27 Скачать руководство пользователя страница 142

Material See chapter 10.4.3 for oil filling volume.

Receptacle
Hose coupling is disconnectedly laying at the machine.
Funnel
Cleaning cloth

Precondition The machine is shut down.

The machine is standing level.
The machine is fully vented, the pressure gauge reads 0 psig.
The machine is at operating temperature.
All compressed air consumers are disconnected and the air outlet valves are open.
The negative cable to the battery is disconnected.

Risk of burns from hot components and escaping oil!
➤ Wear long-sleeved clothing and protective gloves.

➤ Open the cover.

10.4.3.1 Draining the cooling oil

All cooling oil is drained via the oil discharge valve. The oil discharge valve is positioned on the

airend and closed with a sealing cap to prevent contamination. This sealing cap must removed pri‐

or to draining the oil.

The oil can be drained when the hose nozzle has been screwed onto the oil discharge valve.

Fig. 51 Draining the compressor cooling oil

1

Hose coupling

2

Airend

3

Oil drain valve

4

Protective cap

5

Inlet valve

6

Bung (Option oe)

10 Maintenance

10.4 Compressor Maintenance

132

Operator Manual    Screw Compressor   
M27  

No.: 9_9548 05  USE

Содержание M27







































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды