KAESER M27, Руководство оператора

Страница: 160 / 294

2. Check whether the collar of the locknut is flush in the groove of the bearing journal.
The collar has been sheared during securing.
➤ Remove the locknut.
3. Immediately dispose of the old locknut.
4. Place the new locknut onto the thread.
5. Tighten the locknut at simultaneous turning of the wheel hub applying the specified torque.
6. Turn the lock nut back by 30°.
7. Check the bearing play.
The axial play is in permissible range.
8. Use a suitable item (special tool) to secure the collar of the locknut into the groove of the bear‐
ing journal.
9. Check whether the collar of the locknut is flush in the groove of the bearing journal.
The collar of the locknut is flush with the groove of the bearing journal.
The locknut is secured against loosening.
10. Place the protective cap.
10.7.3 Towbar maintenance
Clean and lubricate all sliding and rotating bearings as necessary but at least every 6 months.
Material Lithium-enriched multi-purpose grease
Acid-free oil
Cleaning cloths
Precondition The machine is switched off.
The machine is disconnected from the towing vehicle and safely parked.
10.7.3.1 Checking the towbar
Lubricating points
Option
Representation
rb/rm/rr
10-M1350
4
1
1
rb/rm/rs
3
4
1
1
2
2
3
10 Maintenance
10.7 Chassis maintenance
150
Operator Manual Screw Compressor
M27
No.: 9_9548 05 USE