manualshive.com logo in svg

KAESER M27, Руководство оператора

Поделиться
Скачать
KAESER M27 Скачать руководство пользователя страница 41

Position Symbol

Meaning

310
311

Injury or damage from open machine.
➤ Operate the machine only when closed.
➤ Transport the machine only when closed.

320*

Loud noise and oil mist when the safety relief valve opens.

Ear damage and burns can result.
➤ Wear ear protection and protective clothing.
➤ Close all maintenance doors and cover panels.
➤ Work carefully.

330
331

Hot surface can cause burns.
➤ Let the machine cool down.
➤ Work carefully.
➤ Wear protective clothing and gloves.

332

333

Hot surface can cause burns.
➤ Let the machine cool down.
➤ Work carefully.
➤ Wear protective clothing and gloves.
➤ Do not inhale dangerous gases.

430

Connect air hoses only in full compliance with OSHA standard

29 CFR 1926,302 (bX7).

The required safety devices should be tested in accordance with their manu‐

facturer's recommendations to verify that they reduce pressure in case of

hose failure and will not nuisance trip with the hose and tool combinations in

use.

440

Compressed air quality.

Injury and/or contamination can result from breathing compressed air.

Contamination of food can result from using untreated compressed air for

food processing.
➤ Never breathe untreated compressed air!
➤ Air from this compressor must meet OSHA 29 CFR1910.134 and

FDA 21 CFR178.3570 standards, if used for breathing or food process‐

ing. Use proper compressed air treatment.

➤ Food grade coolant must be used for food processing.

450

Loud noise and compressed air blast!

Damage to hearing and injury if ball valve is opened without a compressed

air hose being connected.
➤ Connect a suitable compressed air hose.
➤ Open the ball valve.

* Location within the machine

** Only towable machines

*** Only machines equipped with Option ga, gb

3

Safety and Responsibility

3.7

Safety signs

No.: 9_9548 05  USE

Operator Manual    Screw Compressor   
M27  

31

Содержание M27







































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды