manualshive.com logo in svg

KAESER M27, Руководство оператора

Поделиться
Скачать
KAESER M27 Скачать руководство пользователя страница 173

Visually check for damage

Precondition The negative cable to the battery is disconnected.

1. Manually turn the drive belt 

2

 at the pulley and inspect the full length of the belt for splits, frays

or any sign of stretching.
In case of damage: Replace the drive belt immediately.

2. Reconnect the negative battery terminal.

Removing the old drive belt

Precondition The negative cable to the battery is disconnected.

1. Insert the ratchet with a 1/2 inch square in the square socket 

9

 of the swing frame 

8

.

2. Right hand: Press the ratchet lever downward and hold.
3. Left hand: Push the drive belt downward and pull it off to side from the tension pulley 

3

.

4. Permit the swing frame to slowly spring back.
5. Remove the old drive belt.

Checking the pulleys

1. Dirty pulley: Clean pulley.
2. Worn pulley: Change the pulley.

Installing a new drive belt

1. Lightly place the new drive belt over the crankshaft pulley 

1

 and the generator pulley 

5

.

2. Insert the ratchet with a 1/2 inch square in the square socket of the swing frame.
3. Right hand: Press the ratchet lever downward and hold.
4. Left hand: Push the drive belt downward and guide it sideways beneath the tension pulley.
5. Permit the swing frame to slowly spring back.

Belt tension is generated by leverage F2 

10 

 and tension pulley.

6. Reconnect the negative battery terminal.

10 Maintenance

10.8 Maintenance for Optional Items

No.: 9_9548 05  USE

Operator Manual    Screw Compressor   
M27  

163

Содержание M27







































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды