manualshive.com logo in svg

KAESER M27, Руководство оператора

Поделиться
Скачать
KAESER M27 Скачать руководство пользователя страница 34

➤ Then open an outlet valve carefully to ensure that the line between the minimum pressure /

check valve and the compressed air outlet is vented.

➤ Do not carry out welding, heat treatment, or mechanical modifications to pressurized compo‐

nents (e.g. pipes and vessels) as this influences the component's resistance to pressure.

The safety of the machine is then no longer ensured.

Compressed air quality

The composition of the compressed air must be suitable for the actual application in order to pre‐

clude health and life-threatening dangers.
➤ Use appropriate systems for air treatment before using the compressed air from this machine

as breathing air (fresh air reinforcement) and/or for the processing of food products.

➤ Use food-grade cooling oil whenever compressed air is to come into contact with food prod‐

ucts.

Spring forces

Springs under tension or compression store energy. Uncontrolled release of this energy can cause

serious injury or death.

Minimum pressure / check valves, safety relief valves, and inlet valves are powerfully spring-loa‐

ded.
➤ Do not open or dismantle any valves.

Rotating components

Touching the fan wheel, the coupling, or the belt drive while the machine is switched on can result

in serious injury.
➤ Do not open the access doors or panels while the machine is running.
➤ Switch off and lock out the machine and check that no voltage is present before opening the

access doors or canopy.

➤ Wear close-fitting clothes and a hair net if necessary.
➤ Ensure that all covers and safety guards are in place and secured before restarting.

Temperature

The operation of the combustion engine and the compression generate high temperatures. Touch‐

ing hot components may cause injuries.
➤ Avoid contact with hot components.

These include, for example, engine, compressor airend, oil and compressed air lines, coolers,

and oil separator tank. Any objects in or near the flow of exhaust gas or discharged cooling air

will become very hot.

➤ Wear protective clothing.
➤ Wear protective gloves when connecting or disconnecting compressed air hoses.
➤ Allow the machine to cool down before commencing any maintenance work.
➤ If welding is carried out on or near the machine, take adequate measures to prevent sparks or

heat from igniting oil vapors or parts of the machine.

Noise

The enclosure absorbs the machine noise to a tolerable level. This function will be effective only if

the bodywork is closed.

3

Safety and Responsibility

3.5

Dangers

24

Operator Manual    Screw Compressor   
M27  

No.: 9_9548 05  USE

Содержание M27







































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды