Juniper JUNOSE 11.1.X MULTICAST ROUTING, Руководство по настройке

Страница: 139 / 270

■
Specify the summary keyword to view the number of configured, enabled, and
disabled PIM dense mode, PIM sparse mode, and PIM sparse-dense mode
interfaces.
■
Specify the count keyword to view the number of multicast packets that the
interface has sent and received.
■
Field descriptions
■
Interface Addr—IP address of the interface
■
Interface Name—Type and specifier of the interface. For details about
interface types and specifiers, see Interface Types and Specifiers in
JUNOSe
Command Reference Guide .
■
Ver—Version of PIM running on this interface
■
Mode—PIM mode running on this interface: Sparse, Dense, or SparseDense
■
Nbr Count—Number of neighbors connected to this interface
■
Hello Intvl—Time interval, in seconds, at which the interface sends hello
messages to neighbors
■
J/P Interval—Time interval, in seconds, at which the interface sends the
join/prune messages
■
DR Addr—Address of the designated router
■
SM—Number of PIM sparse mode interfaces
■
DM—Number of PIM dense mode interfaces
■
SM/DM—Number of PIM sparse-dense mode interfaces
■
enabled—Number of interfaces administratively enabled
■
disabled—Number of interfaces administratively disabled
■
DR Pri— Designated router priority value
■
ControlPktCount In|Out—PIM messages received on and sent from this
interface
■
Hello—Total number of hello messages
■
JoinPrune—Total number of join and prune messages
■
Assert—Total number of assert messages
■
Example 1
host1# show ip pim interface
PIM Interface Table
Interface Addr Interface State Ver Mode Nbr Hello J/P DR DR Addr JoinFilter
Count Intvl Intvl Pri
101.0.0.1 ATM2/0.100 Up 2 Sparse 1 30 150 5 101.0.0.2 -
102.0.0.1 ATM2/0.101 Up 2 Sparse 1 30 100 2 102.0.0.2 silver
103.0.0.1 ATM3/0.102 Up 2 Sparse 1 30 100 2 103.0.0.1 gold
Monitoring PIM
■ 117
Chapter 3: Configuring PIM for IPv4 Multicast