Juniper JUNOSE 11.1.X MULTICAST ROUTING, Руководство по настройке

Страница: 87 / 270

■
Operational state—Physical status of the interface: enabled or disabled
■
Version—IGMP version
■
State—Function of the interface: querier or nonquerier
■
Query Interval—Time interval in seconds at which this interface sends query
messages
■
Other querier present interval—Time in seconds that the interface waits
before declaring itself as the querier
■
Maximum response time—Time interval, in tenths of a second, during which
this interface waits for a host to respond
■
Last member query interval—Time, in tenths of a second, that this interface
waits before sending a new query to a host that sends a group leave message
■
Robustness—Number of times this interface sends IGMP messages
■
Information about whether the interface accepts IGMP reports from hosts
on any subnetwork
■
Interface defaults to global promiscuous mode—Interface uses the setting
of the
igmp promiscuous command to determine whether it accepts
IGMP reports from hosts on any subnetwork
■
Information about standard IP access lists configured with the ip igmp
access-group command
■
Inbound access group—Access list specified
■
No inbound access group—No access list specified
■
Information about IP access lists configured with the ip igmp
access-source-group command
■
Inbound access source-group—Access list specified
■
No inbound access source-group—No access list specified
■
Information about OIF maps configured with the ip igmp apply-oif-map
command
■
Inbound apply-oif-map—Map name specified
■
No inbound apply-oif-map—No map name specified
■
Immediate Leave—Setting of the ip igmp immediate-leave command:
enabled or disabled
■
Explicit Host Tracking—Setting of the ip igmp explicit-tracking command:
enabled or disabled
■
Max-Group limit—Number of IGMP groups that the interface can accept, as
configured with the
ip igmp group limit command
■
Admission-Bandwidth limit—Value of the admission-bandwidth limit set for
an interface that accepts IGMP groups, or No Limit
Monitoring IGMP
■ 65
Chapter 2: Configuring IGMP