Juniper JUNOSE 11.1.X MULTICAST ROUTING, Руководство по настройке

Страница: 93 / 270

■
OIF-MAP Name—Name of the map requested
■
Group Address—Multicast group IP address requested
■
Source Address—Source IP address requested
■
Mapped OIF—Interface associated with the OIF map
■
Example
host1# show ip igmp oif-mapping OIFMAP 232.1.1.1 10.1.1.10
OIF Mapping
OIF-MAP Name : OIFMAP
Group Address : 232.1.1.1
Source Address : 10.1.1.10
Mapped OIF : ATM5/0.120
■
See show ip igmp oif-mapping.
show ip igmp ssm-mapping
■
Use to display the SSM mapping state and the source list mapping associated
with a multicast group address.
■
Field descriptions
■
SSM Mapping—Status of SSM mapping on the interface: Enabled or Disabled
■
Group Address—Multicast group address requested
■
Source List—List of sources mapped to the multicast group address
■
Example
host1:boston# show ip igmp ssm-mapping 232.1.1.1
SSM Mapping : Enabled
Group Address : 232.1.1.1
Source List : 172.1.1.1
: 172.1.1.2
■
See show ip igmp ssm-mapping.
show multicast group limit
■
Use to display the number of IGMP groups that ports have accepted and, if
configured, the maximum number of groups that ports can accept.
■
A value of –1 indicates that no port group limit is configured.
■
Only ports that have accepted IGMP groups and ports for which you have
configured a limit for the number of IGMP groups appear in this display.
■
Field descriptions
■
Port—Identifier of the port in slot / port format
■
slot—Number of the chassis slot in the range 0–6 (ERX7xx models) and
0–13 (ERX14xx models)
Monitoring IGMP
■ 71
Chapter 2: Configuring IGMP