Juniper JUNOSE 11.1.X MULTICAST ROUTING, Руководство по настройке

Страница: 255 / 270

■
Join filter—Name of the join filter access-list (if configured) for this PIM router
■
Designated Router Priority—Designated router priority value
■
Example
host1:1# show ipv6 pim
Default PIM Version: 2
Default Domain Id: 0
Default Hello Period: 30
Default Hello HoldTime: 105
Join-Prune Interval: 100
Join-Prune Holdtime: 350
Keepalive Period: 210
Assert Time: 210
Register Suppression Time: 60
Register Probe Time: 5
Register TTL: 64
SSM enabled, range default
Sparse-Mode Graceful Restart Duration: 30
Graceful restart is complete (timer 0 seconds)
Join filter, access-list bronze
Designated Router Priority: 2
■
See show ipv6 pim.
show ipv6 pim bsr
■
Use to display BSR information and the group prefixes for which the local router
is a candidate RP in a PIM sparse mode environment.
■
Field descriptions
■
Candidacy—Whether or not the router is a candidate BSR
■
Configured on—Interface on which the router is configured
■
address—Address of the router
■
hashMaskLen—Hash mask length
■
priority—Priority of the router
■
period—Time between bootstrap messages
■
Elected BSR—“ this router” or IP address of the elected bootstrap router
■
next BSM—If BSR is “ this router,” time until the next bootstrap message is
sent
■
expires in—If BSR is not “ this router,” time until the elected BSR expires if
no bootstrap messages are received
■
Local candidate RP mapping(s)—Routers that the mapping agent is evaluating
to determine an RP router for this interface
■
Example 1—On a router that is the elected BSR
host1:1# show ipv6 pim bsr
This PIM router is a Candidate BSR.
Monitoring PIM
■ 233
Chapter 7: Configuring PIM for IPv6 Multicast