Juniper JUNOSE 11.1.X MULTICAST ROUTING, Руководство по настройке

Страница: 163 / 270

Neighbor Major Version: 3
Neighbor Minor Version: 255
Neighbor Capabilities: Prune GenerationId Mtrace NetMask
Neighbor State: Active
Geneneration ID: 0x3a13fbc2
Routes Received: 1
Bad Routes Received 0
Bad Packets Received: 0
■
Example 2
host1:v3# show ip dvmrp neighbor brief
Interface NbrAddress UpTime Maj Min Cap State
atm5/0.14 14.0.0.1 32 3 255 PGMN Active
atm5/0.15 15.0.0.1 34 3 255 PGMN Active
■
See show ip dvmrp neighbor.
show ip dvmrp route
■
Use to display information about DVMRP routes.
■
Specify an IP address to display the best route to that address.
■
Specify an IP address and subnet mask to display the route that exactly matches
this IP address and subnet mask
■
Specify an interface type and specifier to display routes associated with that
interface. For details about interface types and specifiers, see Interface Types
and Specifiers in
JUNOSe Command Reference Guide .
■
Specify the brief keyword to view a summary of information.
■
Field descriptions
■
Prefix—IP address of the network
■
Length—Length of the subnet mask for the network
■
usNbr/Owner—IP address of the upstream neighbor associated with this
route or a description of the origin of the route
■
Dvmrp Local—Route is associated with a directly attached network
■
Dvmrp Aggregate—Route is an aggregate route determined by
summarization
■
Metric—Metric associated with this interface for this route
■
ExpireTime—Time, in seconds, until the VR starts the process for removing
the route
■
UpTime—Length of time, in seconds, that the route has been in the DVMRP
routing table
■
Interface—Type and specifier for the interface, such as atm3/0.
■
Example 1
Monitoring DVMRP
■ 141
Chapter 4: Configuring DVMRP