Juniper JUNOSE 11.1.X MULTICAST ROUTING, Руководство по настройке

Страница: 53 / 270

■
QoS bandwidth—QoS bandwidth per mroute, in bps
■
Uptime—Length of time that the (S,G) pair has been active, in days
hours:minutes:seconds format
■
Data Rate—Flow rate for the threshold entry, in Kbps
■
SPT Threshold—SPT threshold value for the entry, in Kbps
■
Threshold—Threshold value for the entry, in Kpbs
■
Expires—Length of time that the (S,G) pair can be active, in days
hours:minutes:seconds format or never
■
RPF route—IP address and subnetwork mask of the RPF route
■
incoming interface—Type and specifier of the incoming interface for the
RPF route
■
neighbor address—IP address of the neighbor
■
State/Owner—Owner of the route
■
Local—Route belonging to the local interface
■
Static—Static route
■
Other protocols—Route established by a protocol such as RIP or OSPF
■
Incoming interface list—List of incoming interfaces on the router. Details
include:
■
Type of interface and its specifier
■
Action that the interface takes with packets: Accept or Discard
■
Multicast protocol that owns the interface
■
Outgoing interface list—List of outgoing interfaces on the router. Details
include:
■
Type of interface and its specifier
■
Action that the interface takes with packets: Forward or Blocked
(port-limit)
■
Protocol running on the interface: PIM, DVMRP, or IGMP
■
Amount of time that the interface has been active in this multicast
forwarding entry, in
days hours:minutes:seconds format
■
Length of time that the interface can remain active in this multicast
forwarding entry, in
days hours:minutes:seconds format or never
■
Counts—Number of types of source group mappings
■
(S, G)—Number of (S, G) entries
■
(*, G)—Number of (*, G) entries
Monitoring IP Multicast Settings
■ 31
Chapter 1: Configuring IPv4 Multicast