Juniper JUNOSE 11.1.X MULTICAST ROUTING, Руководство по настройке

Страница: 136 / 270

■
expires in—If BSR is not this router, time until the elected BSR expires if no
bootstrap messages are received
■
Local candidate RP mapping(s)—Routers that the mapping agent is evaluating
to determine an RP router for this interface
■
Example 1—On a router that is the elected BSR
host1:1# show ip pim bsr
This PIM router is a Candidate BSR.
Configured on intf ATM3/0.101, address: 101.0.0.1
hashMaskLen 30, priority 2, period 60 seconds.
Elected BSR is this router, next BSM in 3 seconds.
Local candidate RP mapping(s):
Candidate RP 101.0.0.1
224.0.0.0/4, BSR, hold-time 150, interval 60, priority 192
228.0.0.0/24, BSR, hold-time 150, interval 60, priority 192, from
access-list acl
230.0.0.0/24, BSR, hold-time 150, interval 60, priority 192, from
access-list acl
■
Example 2—On a router that is a candidate BSR
host1:1# show ip pim bsr
This PIM router is a Candidate BSR.
Configured on intf ATM3/0.100, address: 100.0.0.1
hashMaskLen 30, priority 2, period 60 seconds.
Elected BSR is 101.0.0.1 (priority 0), expires in 73 seconds.
■
Example 3—On a router that is not a candidate BSR
host1:1# show ip pim bsr
This PIM router is not a Candidate BSR.
Elected BSR is 101.0.0.1 (priority 0), expires in 73 seconds.
■
See show ip pim bsr.
show ip pim data-mdt
■
Use to display information about active data MDTs.
■
To display information about data MDTs on which the provider edge transmits
data, use the
sender keyword.
■
To display information about data MDTs on which the provider edge receives
data, use the
receiver keyword.
■
To display information about an IP PIM group address pool, use the group
keyword.
■
To display a summary of configuration for each data MDT, use the summary
keyword.
■
To display the number of data MDTs, use the count keyword.
■
Field descriptions
114 ■
Monitoring PIM
JUNOSe 11.1.x Multicast Routing Configuration Guide