Juniper JUNOSE 11.1.X MULTICAST ROUTING, Руководство по настройке

Страница: 230 / 270

■
Use to display the mapped OIF to be assigned to a given map-name, group
address, and source address.
■
Field descriptions
■
OIF-MAP Name—Name of the map requested
■
Group Address—Multicast group IP address requested
■
Source Address—Source IP address requested
■
Mapped OIF—Join interface associated with the OIF map
■
Example
host1# show ipv6 mld oif-mapping OIFMAP ff3e::1 10::10
OIF Mapping
OIF-MAP Name : OIFMAP
Group Address : ff3e::1
Source Address : 10::10
Mapped OIF : ATM5/0.120
■
See show ipv6 mld oif-mapping.
show ipv6 mld ssm-mapping
■
Use to display the SSM mapping state and the source list mapping associated
with a multicast group address.
■
Field descriptions
■
SSM Mapping—Status of SSM mapping on the interface (enabled or disabled)
■
Group Address—Multicast group address requested
■
Source List—List of sources mapped to the multicast group address
■
Example
host1:boston# show ipv6 mld ssm-mapping ff3e::1
SSM Mapping : Enabled
Group Address : ff3e::1
Source List : 2001::1
: 2001::2
■
See show ipv6 mld ssm-mapping.
show multicast group limit
■
Use to display the number of MLD groups that ports have accepted and, if
configured, the maximum number of groups that ports can accept.
■
A value of –1 indicates that no port group limit is configured.
■
Only ports that have accepted MLD groups and ports for which you have
configured a limit for the number of MLD groups appear in this display.
■
Field descriptions
■
Port—Identifier of the port in slot / port format
208 ■
Monitoring MLD
JUNOSe 11.1.x Multicast Routing Configuration Guide