manualshive.com logo in svg

Juniper JUNOSE 11.1.X MULTICAST ROUTING, Руководство по настройке

Конфигурационное руководство Juniper JUNOSE 11.1.X MULTICAST ROUTING доступно для бесплатного скачивания на нашем сайте. Это подробное руководство поможет вам освоить настройку и использование продукта. Посетите manualshive.com чтобы получить доступ к этому полезному ресурсу.

Поделиться
Скачать
background image

IP multicast routes.......................................................40
IP multicasting

benefits of...............................................................3
deleting routes......................................................30
enabling..................................................................7
M-BONE..............................................................125
monitoring............................................................30

ip pim commands........................................................88

ip pim...................................................................88
ip pim bsr-candidate.............................................93
ip pim data-mdt..................................................104
ip pim group-address-pool..................................104
ip pim join-filter..................................................106
ip pim query-interval............................................88
ip pim rp-address..................................................90
ip pim rp-candidate...............................................93
ip pim send-rp-announce......................................90
ip pim send-rp-discovery scope.............................90
ip pim sparse-mode graceful-restart-duration........88
ip pim spt-threshold..............................................94

See also 

 show ip pim commands

ip rip commands

ip rip bfd-liveness-detection........................108, 229

IP tunnels

monitoring............................................................30

ipv6 commands.........................................................153

ip route-type.......................................................153
ipv6 block-multicast-sources...............................168
ipv6 mld robustness............................................191
ipv6 multicast-routing.........................................150
ipv6 multicast-routing disable-rpf-check..............152
ipv6 multicast-routing permanent-route..............153
ipv6 rpf-route......................................................151

See also 

 show ipv6 commands

ipv6 mld commands..................................................188

ipv6 mld.............................................................188
ipv6 mld access-group........................................191
ipv6 mld access-source-group.............................191
ipv6 mld apply-oif-map.......................................192
ipv6 mld explicit-tracking...................................196
ipv6 mld group limit...........................................195
ipv6 mld immediate-leave..................................189
ipv6 mld last-member query-interval..................189
ipv6 mld oif-map................................................192
ipv6 mld querier-timeout....................................190
ipv6 mld query-interval.......................................190
ipv6 mld query-max-response-time....................190
ipv6 mld ssm-map enable...................................193
ipv6 mld ssm-map static.....................................193
ipv6 mld static-exclude.......................................196
ipv6 mld static-group..........................................192
ipv6 mld static-include........................................196
ipv6 mld version.................................166, 188, 192
ipv6 mld-proxy...................................................210

ipv6 mld-proxy unsolicited-report-interval..........210
ipv6 mld-proxy version.......................................210

See also 

 show ipv6 mld commands

IPv6 multicast

benefits of...........................................................147
deleting routes....................................................172
enabling..............................................................150
monitoring..........................................................172

ipv6 multicast commands

ipv6 multicast admission-bandwidth-limit...........168
ipv6 multicast ioa-packet-replication...................166
ipv6 multicast-routing bandwidth-map...............160

IPv6 multicast groups

assigning to an interface.....................................192
identifying..........................................................184
leaving................................................................184
maintaining membership of................................184
reporting.............................................................183
specifying...........................................................191

ipv6 pim commands..........................................220, 224

ipv6 pim.............................................................220
ipv6 pim bsr-candidate.......................................222
ipv6 pim join-filter..............................................226
ipv6 pim query-interval.......................................220
ipv6 pim rp-address............................................222
ipv6 pim rp-candidate.........................................222
ipv6 pim spt-threshold........................................224

See also 

 show ipv6 pim commands

J

join messages......................................................83, 216

L

leave group membership messages.....................44, 184
leaving an IP multicast group.......................................44
leaving an IPv6 multicast group.................................184
limiting IGMP groups on interfaces..............................56
limiting MLD groups on interfaces.............................194
liveness detection

RIP and BFD...............................................108, 229

M

M-BONE (multicast backbone of the Internet)............125
manuals

comments on.......................................................xxi

MDT (Multicast Distribution Tree)

creating with default MDT.....................................95

mdt commands

mdt-data-delay....................................................104
mdt-data-holddown............................................105
mdt-data-timeout................................................105
mdt-interval........................................................105

Index

■

245

Index

Содержание JUNOSE 11.1.X MULTICAST ROUTING















































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для JUNOSE 11.1.X MULTICAST ROUTING

KAPERSKY ANTI-VIRUS BUSINESS OPTIMAL Manual preview
ANTI-VIRUS BUSINESS OPTIMAL
Бренд: KAPERSKY Страницы: 31
Alcatel-Lucent Wireless Network Guardian 9900 Brochure preview
Wireless Network Guardian 9900
Бренд: Alcatel-Lucent Страницы: 2
Lexmark LexPrint User Manual preview
LexPrint
Бренд: Lexmark Страницы: 20
Aastra MX-ONE 4.2 User Manual preview
MX-ONE 4.2
Бренд: Aastra Страницы: 46
Minolta DIMAGE VIEWER 2.1 Instruction Manual preview
DIMAGE VIEWER 2.1
Бренд: Minolta Страницы: 84
Fender G-DEC 3 MUSTANG FUSE 2-0 Manual preview
G-DEC 3 MUSTANG FUSE 2-0
Бренд: Fender Страницы: 12
Mobile Crossing WayPoint Map Loader User Manual preview
WayPoint Map Loader
Бренд: Mobile Crossing Страницы: 32
Extreme Networks Ridgeline 3.0 Manual preview
Ridgeline 3.0
Бренд: Extreme Networks Страницы: 376
Red Hat CERTIFICATE 8.0 RELEASE NOTES Release Note preview
CERTIFICATE 8.0 RELEASE NOTES
Бренд: Red Hat Страницы: 34
Q-See Remote Client 4.0.1 User Manual preview
Remote Client 4.0.1
Бренд: Q-See Страницы: 72
Avaya P130 SMON User Manual preview
P130 SMON
Бренд: Avaya Страницы: 160
Red Hat CERTIFICATE SYSTEM 7.2 - MIGRATION GUIDE Administration Manual preview
CERTIFICATE SYSTEM 7.2 - MIGRATION GUIDE
Бренд: Red Hat Страницы: 512
Tascam GigaEditor 4 User Manual preview
GigaEditor 4
Бренд: Tascam Страницы: 210
Sierra Wireless Writing an embedded application loader Application Note preview
Writing an embedded application loader
Бренд: Sierra Wireless Страницы: 9
Sierra Wireless IP Manager Configuration Manual preview
IP Manager
Бренд: Sierra Wireless Страницы: 16
Gallo Studio Devil User Manual preview
Studio Devil
Бренд: Gallo Страницы: 9
GNOME 2.4 User Manual preview
2.4
Бренд: GNOME Страницы: 213
FieldServer FS-8700-101 Driver Manual preview
FS-8700-101
Бренд: FieldServer Страницы: 23

Бренды по названию

Популярные бренды

Загрузить еще бренды