Juniper JUNOSE 11.1.X MULTICAST ROUTING, Руководство по настройке

Страница: 134 / 270

■
Join-Prune Holdtime— Hold time value (in seconds) set in the join/prune
messages originated by the PIM router. The hold time is 3.5 times the PIM
join/prune message interval value.
■
Keepalive Period—Time SG join state is maintained in the absence of SG
Join message
■
Assert Time—Period after last assert before assert state is timed out
■
Register Suppression Time—Period during which a designated router stops
sending registers to the RP
■
Register Probe Time—Time before register suppression time (RST) expires
when a designated router might send a NULL-Register to the RP
■
Register TTL—TTL value (in PIM register packets) originated by this PIM
router
■
SSM—State of SSM on this PIM router (enabled or disabled)
■
range—Default SSM group range or name of the access list specifying the
range
■
Sparse-Mode Graceful Restart Duration—Restart interval in seconds
■
Join filter—Name of the join filter access-list (if configured) for this PIM router
■
Designated Router Priority—Designated router priority value
■
Example
host1:1# show ip pim
Default PIM Version: 2
Default Domain Id: 0
Default Hello Period: 30
Default Hello HoldTime: 105
Join-Prune Interval: 100
Join-Prune Holdtime: 350
Keepalive Period: 210
Assert Time: 210
Register Suppression Time: 60
Register Probe Time: 5
Register TTL: 64
SSM enabled, range default
Sparse-Mode Graceful Restart Duration: 30
Graceful restart is complete (timer 0 seconds)
Join filter, access-list bronze
Designated Router Priority: 2
■
See show ip pim.
show ip pim auto-rp
■
Use to display information about RP routers and the RP mapping agent in a PIM
sparse mode environment.
■
Field descriptions
112 ■
Monitoring PIM
JUNOSe 11.1.x Multicast Routing Configuration Guide