INVT GD350-004G/5R5P-45-AS, Руководство по эксплуатации

Страница: 198 / 372

Goodrive350 IP55 High-ingress Protection Series VFD Function parameter list
-189-
Function
code
Name Description
Default
value
Modify
P12.31
–
P12.32
Reserved / /
/
P13
––Control parameters of synchronous motor
Function
code
Name Description
Default
value
Modify
P13.00
Reduction rate
of the injection
current of
synchronous
motor
0.0%
–100.0% rated motor current
80.0%
○
P13.01
Initial pole
detection mode
0: No detection
1: High-frequency current injection
2: Pulse superimposition
0
◎
P13.02 Pull-in current 1
Pull-in current is the pole position orientation
current; pull-in current 1 is valid within the lower
limit of pull-in current switch-over frequency
threshold. If users need to increase the starting
torque, increase the value of this function code
properly.
Setting range: 0.0%
–100.0% (rated motor
current)
20.0%
○
P13.03 Pull-in current 2
Pull-in current is the pole position orientation
current; pull-in current 2 is valid within the upper
limit of pull-in current switch-over frequency
threshold, and users do not need to change
pull-in current 2 under common situations.
Setting range: 0.0%
–100.0% (rated motor
current)
10.0%
○
P13.04
Switch-over
frequency of
pull-in current
0.00Hz
–200.0% (of the motor rated current)
20.0%
○
P13.05 Reserved / / /
P13.06
High-frequency
superposition
voltage
0.0
–300.0% rated motor voltage
100.0%
◎
P13.07 Reserved / / /
P13.08
Control
parameter 1
0x0000
–0xFFFF
0x0000
○
P13.09
Frequency
threshold of
phase-lock loop
switch-in
This parameter is used to set the frequency
threshold for enabling the counter-electromotive
force phase-locked loop in SVC 0. When the
running frequency is lower than the value of this
parameter, the phase-locked loop is disabled;
and when the running frequency is higher than
50.00
○