INVT GD350-004G/5R5P-45-AS, Руководство по эксплуатации

Страница: 242 / 372

Goodrive350 IP55 High-ingress Protection Series VFD Function parameter list
-233-
Function
code
Name Description
Default
value
Modify
object 1: 12+24+60
2: 24+24+60
3: 36+24+60
4: 48+24+60
5: 60+48+60
6: 72+24+60
7: 84+24+60
8: 96+96+96
Tens place: Card that communicates with the
programmable card via PZD (Only valid when
the ones place is set to 5)
0: DP
1: CANopen
2: PN
Note: P27.26 can be changed at any time, but
the change will only take effect after the
re-power on.
P27.27
PLC card save
function at
power failure
0
–1
0: Disable
1: Enable 1
◎
P28
––Master/slave control functions
Function
code
Name Description
Default
value
Modify
P28.00
Master/slave
mode selection
0: The master/slave control is invalid
1: This machine is a master
2: This machine is a slave
0
◎
P28.01
Master/slave
communication
data selection
0: CAN
1: Reserved
0
◎
P28.02
Master/slave
control mode
0x000
–0x112
Ones: Master/slave running mode selection
0: Master/slave mode 0
(The master and slave adopt speed control and
maintains the power balance by droop control)
1: Master/slave mode 1
(The master and slave must be in the same type
of vector control mode. The master is speed
control, and the slave will be forced to be in the
torque control mode.
2: Master/slave mode 2
Start in the slave first speed mode (master/slave
mode 0) and then switch to torque mode at a
certain frequency point (master/slave mode 1)
Tens: Slave start command source selection
0: Follow the master to start
0x001
◎