INVT GD200A-004G-4, Руководство по эксплуатации

Страница: 94 / 182

GD200A series VFD Function parameters
-87-
Function
code
Name Description
Default
value
Modify
P10.31
Running time of
step 14
Setting range of P10.(2n,1<n<17): -100.0
–100.0%
Setting range of P10.(2n+1,1<n<17):
0.0
–6553.5s(min)
0.0s
○
P10.32
Multi-step
speed 15
0.0%
○
P10.33
Running time of
step 15
0.0s
○
P10.34
Simple PLC
0
–7 step
ACC/DEC time
Below is the detailed instruction:
Function
code
Binary bit Step
ACC/DEC
0
ACC/DEC
1
ACC/DEC
2
ACC/DEC
3
P10.34
BIT1 BIT0 0 00 01 10 11
BIT3 BIT2 1 00 01 10 11
BIT5 BIT4 2 00 01 10 11
BIT7 BIT6 3 00 01 10 11
BIT9 BIT8 4 00 01 10 11
BIT11 BIT10 5 00 01 10 11
BIT13 BIT12 6 00 01 10 11
BIT15 BIT14 7 00 01 10 11
P10.35
BIT1 BIT0 8 00 01 10 11
BIT3 BIT2 9 00 01 10 11
BIT5 BIT4 10 00 01 10 11
BIT7 BIT6 11 00 01 10 11
BIT9 BIT8 12 00 01 10 11
BIT11 BIT10 13 00 01 10 11
BIT13 BIT12 14 00 01 10 11
BIT15 BIT14 15 00 01 10 11
After the users select the corresponding
ACC/DEC time, the combined 16 binary bits will
change into decimal bit, and then set the
corresponding function codes.
Setting range: 0x0000
–0xFFFF
0x0000
○
P10.35
Simple PLC
8
–15 step
ACC/DEC time
0x0000
○
P10.36 PLC restart
0: Restart from the first step; stop during running
(cause by the stop command, fault or power loss),
run from the first step after restart.
1: Continue to run from the stop frequency; stop
during running (cause by stop command and
fault), the VFD will record the running time
automatically, enter into the step after restart and
keep the remaining running at the setting
frequency.
0
◎