INVT GD200A-004G-4, Руководство по эксплуатации

Страница: 137 / 182

GD200A series VFD Communication protocol
-130-
The theme of checkout is that: the sender calculate the sending data according to a fixed formula,
and then send the result with the message. When the receiver gets this message, they will calculate
anther result according to the same method and compare it with the sending one. If two results are
the same, the message is correct. If not, the message is incorrect.
The error checkout of the frame can be divided into two parts: the bit checkout of the byte and the
whole data checkout of the frame (CRC check).
Bit checkout of the byte
The user can select different bit checkouts or non-checkout, which impacts the check bit setting of
each byte.
The definition of even checkout: add an even check bit before the data transmission to illustrate the
number of "1" in the data transmission is odd number or even number. When it is even, the check
byte is "0", otherwise, the check byte is"1". This method is used to stabilize the parity of the data.
The definition of odd checkout: add an odd check bit before the data transmission to illustrate the
number of "1" in the data transmission is odd number or even number. When it is odd, the check
byte is "0", otherwise, the check byte is"1". This method is used to stabilize the parity of the data.
For example, when transmitting "11001110", there are five "1" in the data. If the even checkout is
applied, the even check bit is "1"; if the odd checkout is applied; the odd check bit is "0". The even
and odd check bit is calculated on the check bit position of the frame. And the receiving devices also
carry out even and odd checkout. If the parity of the receiving data is different from the setting value,
there is an error in the communication.
CRC check
The checkout uses RTU frame format. The frame includes the frame error detection field which is
based on the CRC calculation method. The CRC field is two bytes, including 16 figure binary values.
It is added into the frame after calculated by transmitting device. The receiving device recalculates
the CRC of the received frame and compares them with the value in the received CRC field. If the
two CRC values are different, there is an error in the communication.
During CRC, 0*FFFF will be stored. And then, deal with the continuous 6-above bytes in the frame
and the value in the register. Only the 8Bit data in every character is effective to CRC, while the start
bit, the end and the odd and even check bit is ineffective.
The calculation of CRC applies the international standard CRC checkout principles. When the user
is editing CRC calculation, he can refer to the relative standard CRC calculation to write the required
CRC calculation program.
Here provided a simple function of CRC calculation for the reference (programmed with C
language):
unsigned int crc_cal_value(unsigned char *data_value,unsigned char
data_length)
{