INVT GD200A-004G-4, Руководство по эксплуатации

Страница: 159 / 182

GD200A series VFD Technical data
-152-
IEC/EN 62061
Safety of machinery
– Functional safety of safety-related electrical,
electronic and programmable electronic control systems
IEC/EN 61800-3
Adjustable speed electrical power drives systems. Part 3: EMC
requirements and specific test methods
IEC/EN 61800-5-1
Adjustable speed electrical power drive systems
– Part 5-1: Safety
requirements
– Electrical, thermal and energy
IEC/EN 61800-5-2
Adjustable speed electrical power drive systems
– Part 5-2: Safety
requirements. Functional.
GB/T 30844.1
General-purpose variable-frequency adjustable-speed equipment
of 1 kV and lower
—Part 1: Technical conditions
GB/T 30844.2
General-purpose variable-frequency adjustable-speed equipment
of 1 kV and lower
—Part 2: Test methods
GB/T 30844.3
General-purpose variable-frequency adjustable-speed equipment
of 1 kV and lower
—Part 3: Safety regulations
A.5.1 CE marking
The CE mark is attached to the drive to verify that the drive follows the provisions of the European
Low Voltage (2014/35/EU) and EMC Directives (2014/30/EU).
A.5.2 Compliance with the European EMC Directive
The EMC Directive defines the requirements for immunity and emissions of electrical equipment
used within the European Union. The EMC product standard (EN 61800-3) covers requirements
stated for drives. See section EMC regulations.
A.6 EMC regulations
EMC product standard (EN 61800-3) contains the EMC requirements to the VFD.
First environment: domestic environment (includes establishments connected to a low-voltage
network which supplies buildings used for domestic purposes).
Second environment includes establishments connected to a network not directly supplying
domestic premises.
Four categories of the VFD:
VFD of category C1: VFD of rated voltage less than 1000 V and used in the first environment.
VFD of category C2: VFD of rated voltage less than 1000 V other than pins, sockets and motion
devices and intended to be installed and commissioned only by a professional electrician when used
in the first environment.
Note:
IEC/EN 61800-3 in EMC standard doesn't limit the power distribution of the VFD, but it defines the
step, installation and commission. The professional electrician has necessary skills in installing
and/or commissioning power drive systems, including their EMC aspects.