INVT GD200A-004G-4, Руководство по эксплуатации

Страница: 35 / 182

GD200A series VFD Keypad operation procedure
-28-
5 Keypad operation procedure
5.1 What this chapter contains
This chapter contains following operation:

Buttons, indicating lights and the screen as well as the methods to inspect, modify and set
function codes by keypad

Start
5.2 Keypad
The keypad is used to control Goodrive200A series VFDs, read the state data and adjust
parameters.
A B
Figure 5-1 Keypad
Note:

A in Figure 5-1 shows the keypad of the 0R7G
–015G/018P models and B in Figure 5-1 shows
that of the 018G/022P
–500G models.

The 0R7G
–015G/018P models support optional LED keypads and all series support optional
LCD keypads. The LCD keypad supports several languages, parameters copy, high-definition
display and its installation dimension is compatible with the LED.

Use strew or installation bracket to fix the external keypad. If you need to use the keypad in
another place rather than on the VFD, use a network cable with a standard RJ45 crystal head
as the extension cable. The keypad installation brackets are optional for the 0R7G
–030G/037P
models, while keypad installation brackets are standard configuration for the
037G/045P
–500G models.
No. Name Description
1 State LED RUN/TUNE
LED off
– the VFD is stopped
LED blinking
– the VFD is in parameter
autotune
LED on
– the VFD is running