INVT GD200A-004G-4, Руководство по эксплуатации

Страница: 79 / 182

GD200A series VFD Function parameters
-72-
Function
code
Name Description
Default
value
Modify
13: Input side phase loss (SPI)
14: Output side phase loss (SPO)
15: Overheat of the rectifier module (OH1)
16: Overheat fault of the inverter module (OH2)
17: External fault (EF)
18: 485 communication fault (CE)
19: Current detection fault (ItE)
20: Motor autotune fault (tE)
21: EEPROM operation fault (EEP)
22: PID response offline fault (PIDE)
23: Braking unit fault (bCE)
24: Running time arrival (END)
25: Electrical overload (OL3)
26: Panel communication fault (PCE)
27: Parameter uploading fault (UPE)
28: Parameter downloading fault (DNE)
32: Grounding short circuit fault 1 (ETH1)
33: Grounding short circuit fault 2 (ETH2)
36: Undervoltage fault (LL)
P07.33 Running frequency at present fault 0.00Hz
●
P07.34 Ramp reference frequency at present fault 0.00Hz
●
P07.35 Output voltage at the present fault 0V
●
P07.36 Output current at present fault 0.0A
●
P07.37 Bus voltage at present fault 0.0V
●
P07.38 The max. temperature at present fault 0.0°C
●
P07.39 Input terminals state at present fault 0
●
P07.40 Output terminals state at present fault 0
●
P07.41 Running frequency at the last fault 0.00Hz
●
P07.42 Ramp reference frequency at the last fault 0.00Hz
●
P07.43 Output voltage at the last fault 0V
●
P07.44 The output current at the last fault 0.0A
●
P07.45 Bus voltage at the last fault 0.0V
●
P07.46 The max. temperature at the last fault 0.0°C
●
P07.47 Input terminals state at the last fault 0
●
P07.48 Output terminals state at the last fault 0
●
P07.49 Running frequency at the last but one fault 0.00Hz
●
P07.50 Output voltage at the last but one faults 0.00Hz
●
P07.51 Output current at the last but one faults 0V
●
P07.52 Output current at the last but one fault 0.0A
●