INVT GD200A-004G-4, Руководство по эксплуатации

Страница: 45 / 182

GD200A series VFD Function parameters
-38-
Function
code
Name Description
Default
value
Modify
P00.11 ACC time 1
ACC time means the time needed if the VFD
speeds up from 0Hz to the max. one ( P00.03 ).
DEC time means the time needed if the VFD
speeds down from the max. output frequency to
0Hz ( P00.03 ).
Goodrive200A series VFDs define four groups of
ACC/DEC time which can be selected by P05.
The factory default ACC/DEC time of the VFD is
the first group.
Setting range of P00.11 and P00.12 : 0.0
–3600.0s
Depend
on
model
○
P00.12 DEC time 1
Depend
on
model
○
P00.13
Running
direction
0: Runs at the default direction, the VFD runs in
the forward direction. FWD/REV indicator is off.
1: Runs at the opposite direction, the VFD runs in
the reverse direction. FWD/REV indicator is on.
Modify the function code to shift the rotation
direction of the motor. This effect equals to the
shifting the rotation direction by adjusting either
two of the motor lines (U, V and W). In keypad
control, the motor rotation direction can be
changed by QUICK/JOG on the keypad. Refer to
parameter P07.02 .
Note: When the function parameter comes back
to the default value, the motor’s running direction
will come back to the factory default state, too. In
some cases it should be used with caution after
commissioning if the change of rotation direction is
disabled.
2: Forbid to run in reverse direction: It can be used
in some special cases if the reverse running is
disabled.
0
○
P00.14
Carrier
frequency
setting
Carrier
frequency
Electro magnetic
noise
Noise and leakage
current
Heating
eliminating
High
Low High
Low
High
Low
1kHz
10kHz
15kHz
Mapping between models and carrier frequencies:
Depend
on
model
○