Selenio
TM
BNP User Guide, Release 3.7.1
118
- Grooming - Mapping
Figure 67.
Create Output Transport Stream (Gig E) MPEG-2 or SCTE (unicast view)
Using DSCP
For all supported output transport streams on GigE ports, you can configure traffic classifications—
using the Differentiated Service Code Point (DSCP) option—to provide various quality of service levels
on transport streams configured for a GigE port. This configuration applies only to output transport
streams on GigE ports: any DSCP on input streams is not carried forward into output streams.
You can modify a DSCP value at any time following creating of the output transport stream and your
setting will remain intact following BNP reboots and Release 3.4+ upgrades. A DSCP value configured
on the active BNP is carried over to the standby BNP and used as output if the standby become active.
Menu Path
Use the
Create Output Transport Stream
dialog with a selected GigE port, at the Diffserv Code
Point field, to set a DSCP value (
).
Note:
A system downgrade to a release prior 3.4 will remove all DSCP settings.
