Imagine communications Selenio BNP 2xr, Руководство пользователя

Страница: 145 / 278

Selenio TM BNP User Guide, Release 3.7.1 145
Grooming and PSIP
- Grooming - Mapping
Note: For more information about ETV Configuration, see also
Chapter 10, "ETV Binary Interchange Format."
Table 75. Configure Program Mapping—Grooming Parameters—Destination
Field Description
Port Displays the destination GigE or ASI port of the output port to which the program will
be groomed.
TS ID Displays the destination Transport Stream ID of the output TS to which the program
will be groomed.
Program Number View or modify the destination program number of the output program to which the
program will be groomed.
Synchronize Input
and Output Program
Names Enable (check) or disable (un-check) copying of the current input program name into
the output program name when grooming.
Program Name View or modify the destination program name of the output program name to which
the program will be groomed.
Pass-through Short
Name View or modify the short name.
• When enabled (checked) the name currently displayed in this field is passed
through.
• When disabled (un-checked), up to 7characters can be entered to define the short
name to be passed through.
Pass-through Long
Name View or modify the long name.
• When enabled (checked) the name currently displayed is passed through.
• When disabled (un-checked), up to 32 characters can be entered to define the long
name to be passed through.
PMT PID Select this option to activate the PMT ID box, into which you can then enter the PMT
ID, or the ID of the program map table (PMT).
To set this PMT PID, enter a decimal value in the range 32 to 8175.
Note that display of this entry, in applicable screens, is dependent on the current
setting—as either hexadecimal or decimal—for
Configuration --> Global PID Display.
Enable DPI Select this option to enable DPI for the program only, rather than the whole TS.
• This option is hidden unless a PROGRAM WITH DPI license key has been entered
in the License Manager screen. See also “Managing Licenses” on page 190.
• A GROOMING WITH DPI license key (which enables DPI for the TS) cannot co-
exist with a PROGRAM with DPI license key.
SCTE 30 to 35
Conversion When checked, converts SCTE 30 messages to SCTE 35 cues for transport to the
destination.
You cannot select this option and Forward SCTE 35 Cue for the same output
program.
Allow Audio
Mismatch During
DPI Check this box to allow ads to have a different audio format from the input program
during DPI. By default, ads must have the same audio format as the input program.
Note: Audio mismatch is limited to MPEG-1 and MPEG-2 audio types.
Note: If you enable this feature while DPI is active on the output program, then the
audio mismatch is allowed only from the next set of ads.
Note: PMT is not updated even if the BNP matches MPEG-1 audio to MPEG-2 audio.