Imagine communications Selenio BNP 2xr Скачать руководство пользователя страница 2

Страница: 2 / 278

Selenio BNP User Guide, Release 3.7.1

Selenio

BNP User Guide,

Release 3.7.1

Document part number: 250-0363-01 Rev. A

Printed 12/18/15

Publication Information

This material is protected by the copyright laws of the United States and other countries. No part of this document may be

reproduced, distributed, or altered in any form, by any means, by any entity nor may it be used to make any derivative work

(such as translation, transformation, or adaptation) except in accordance with applicable agreements, contracts, or

licensing, without the express written consent of Imagine Communications. All other uses are illegal.

Notice

This publication is designed to assist in the use of the product as it exists on the date of publication of this manual, and may

not reflect the product at the current time or an unknown time in the future. This publication does not in any way warrant

description accuracy or guarantee the use for the product to which it refers. Imagine Communications reserves the right,

without notice to make such changes in equipment, design, specifications, components, or documentation as progress may

warrant to improve the performance of the product.

Trademarks

Selenio

and Telurio

are trademarks of Imagine Communications. Microsoft® and Windows® are registered

trademarks of Microsoft Corporation. All other trademarks and trade names are the property of their respective companies.

Patents

The products described herein are covered by one or more U.S. and foreign patents pending.

U.S. Patents: 6,996,129; 7,046,677; 7,818,355; 8,180,920. Other US and foreign patents pending.

Contact Information

Imagine Communications has office locations around the world. For domestic and international location and contact

information see: http://www.imaginecommunications.com/contact-us/

Support Contact Information

For domestic and international support of Selenio VMG, Selenio BNP, Selenio SEP, Selenio MMC, Selenio TAT, Telurio

Packager, Telurio Recording Manager, and Telurio BNP products, contact:

Support Contacts:

[email protected]

http://app.imaginecommunications.com/customercommunity

1.866.4.Imagine // (1.866.446.2446) - Inside North America

+1.44.208.339.1900 - Europe & Africa

+971.4.433.8260 - Middle East

+852.2776.0628 - Asia

For domestic and international support of all other Imagine Communications' products not mentioned above, contact:

Support Contacts:

http://www.imaginecommunications.com/services/technical-support/

Содержание Selenio BNP 2xr























































































































































































































































































Результаты поиска

Содержание Selenio BNP 2xr

Отзывы:

Похожие инструкции для Selenio BNP 2xr

Бренды по названию

Популярные бренды

Imagine communications Selenio BNP 2xr, Руководство пользователя

Результаты поиска

Содержание Selenio BNP 2xr

Отзывы:

Похожие инструкции для Selenio BNP 2xr

Бренды по названию

Популярные бренды