IDS X Series, Руководство по обучению

Страница: 116 / 125

116 IDS X-Series Training v2.7
To check the PGM status of PGM 4 you will use the following information:
Code – 1234 (a valid user code in partition 1)
Command – PGM
Extended Command – Status
Data – 4 (PGM number)
The SMS should look like this:
1234 pgm status 4
All status commands:
Action Code Command Ext. Comm Data
Retrieve the status of all partitions 1234 Arm Status All
Retrieve the status of P1 1234 Arm Status P1
Retrieve the status of P3 & P6 1234 Arm Status P3,S6
Retrieve the status of zones in partition 1 1234 Zone Status P1
Retrieve the status of zones in partition 1 & 3 1234 Zone Status P1,P3
Get PGM 8’s status 1234 PGM Status 8
Get PGM Gate’s status 1234 PGM Status Gate
Retrieve bypass status of zone 1 1234 Bypass Status 1
Retrieve status of “Lounge” 1234 Bypass Status Lounge
3. Command Table
Action Code Command Ext. Command Data
Phone Numbers
Add phone number as an Master
number
1234 Add Master 074 049 2481
Add phone number as an Arm number 1234 Add Arming 073 917 0759
Add phone number as a Reporting
number
1234 Add Reporting 071 348 9467
Deleting a phone number 1234 Delete 074 049 2481
Reporting
Turn on reporting for partition events 1234 Report
On
P1,P2,P3.....
074 049 2481
Turn off reporting for global events 1234 Report Off Global 073 917 0759
Turn on reporting for partition and global
events
1234 Report
On
P1,P2,Global
071 348 9467
Turn on full reporting 1234 Report Type Full 074 049 2481
Turn on reduced reporting 1234 Report Type Reduced 073 917 0759
Turn on raw data reporting 1234 Report Type Raw 071 348 9467
Increase the reporting threshold to 50
SMSes
1234 Report Threshold 50 074 049 2481
Arm/Disarm
Away arm all partitions 1234 Arm All
Away arm P1 & P3 1234 Arm P1,P3
Stay arm P2 in stay profile 3 1234 Arm S3 P2
Stay arm P1 & P4 in stay profile 1 1234 Arm S1 P1,P4
Disarm all partitions 1234 Disarm All
Disarm P2 1234 Disarm P2
Disarm P5 & P6 1234 Disarm P5,P6