96
IDS X-Series Training v2.7
Option 16 - Adding Bi-directional Remotes
To add a bi-directional Xwave
2
remote transmitter to a user code.
Option 17 - Edit Bi-directional Remote Buttons
Each button on a bi-directional remote can be assigned a different function, each function requires a
parameter value to indicate which partition or output to apply the function. The user code assigned to the
remote must have the appropriate partition and user property permissions.
To change the button functions:
Table 2: Button Functions
Function
Parameter
Description
Unassigned
--
No function allocated
Arm
Partition Number
Will only arm the partition allocated to button and user code
Disarm
Partition Number
Will only disarm the partition allocated to button and user code
Arm/Disarm
Partition Number
Will only arm or disarm the partition allocated to the user code
Global Arm
Will only arm the partitions allocated to the user code
Global Disarm
Will only disarm the partitions allocated to the user code
Global
Arm/Disarm
Will only arm or disarm the partitions allocated to the user code
Stay Arm
Partition Number
Will arm the allocated partition in the current/last used stay profile
Stay Arm Prof1
Partition Number
Will arm the allocated partition in stay profile 1 and then allow you to scroll
to the next available profile if one is configured
Stay Arm Prof2
Partition Number
Will arm the allocated partition in stay profile 2 and then allow you to scroll
to the next available profile if one is configured
Stay Arm Prof3
Partition Number
Will arm the allocated partition in stay profile 3 and then allow you to scroll
to the next available profile if one is configured
Stay Arm Prof4
Partition Number
Will arm the allocated partition in stay profile 4 and then allow you to scroll
to the next available profile if one is configured
Stay & Go
Partition Number
Will arm the allocated partition in the current/last used stay profile
Instruction
Key presses
All user codes must be added into the system beforehand
Press and hold the [*] key for 3 seconds
[*]
Enter the master code, followed by the [*] key
[1][2][3][4] [*]
Enter the value to add bi-directional remotes, followed by the [*] key
[1][6] [*]
Enter the Xwave
2
hub ID that the remote will be taught to, followed by the [*] key
[1] [*]
Now enter the user code or user slot number, followed by the [*] key
[1][3][7][6] [*]
Press the [*] key when ready to teach the remote transmitter
[*]
Press a button on the bi-directional remote
Press the [*] key to confirm
[*]
When complete press the [#] key
[#]
This will leave you in the master menu
Instruction
Key presses
Press and hold the [*] key for 3 seconds
[*]
Enter the master code, followed by the [*] key
[1][2][3][4] [*]
Enter the value to assign bi-directional remote buttons, followed by the [*] key
[1][7] [*]
Enter the Xwave
2
hub ID that the remote will be taught to, followed by the [*] key
[1] [*]
Now enter the user code or user slot number of the bi-directional remote, followed by the
[*] key
[1][3][7][6] [*]
Scroll to the desired button using the [Panic >>] key, followed by the [*] key
[Panic >>] [*]
Scroll to the button function needed using the [Panic >>] key, followed by the [*] key
[Panic >>] [*]
Enter the parameter followed by [*] to confirm (
See Table 4: Button Functions)
[1] [*]
When complete press the [#] key
[#]
This will leave you in the master menu
