IDS X-Series Training v2.7 | X-SMS Module
113
To turn on reporting for partition 1 and global you will use the following information:
Code – 1234 (a user code)
Command – Report
Extended Command – On P1, global
Data – 074 049 2481 (the number to receive the reporting SMSes)
The SMS should look like this:
1234 report on p1,global 0740492481
To change reporting to full you will use the following information:
Code – 1234 (a user code)
Command – Report
Extended Command – Type
Data – Full 074 049 2481
The SMS should look like this:
1234 report type full 074 049 2481
All reporting commands:
Action
Code
Command
Ext. Command
Data
Turn on reporting for partition
events
1234
Report
On P1,P2,P3.....
074 049 2481
Turn off reporting for global
events
1234
Report
Off Global
073 917 0759
Turn on reporting for partition
and global events
1234
Report
On P1,P2,Global
071 348 9467
Turn on full reporting
1234
Report
Type
Full 074 049 2481
Turn on reduced reporting
1234
Report
Type
Reduced 074 049 2481
Turn on raw data reporting
1234
Report
Type
Raw 074 049 2481
Only events that are enabled on the alarm panel will be reported.
Only a “Master Phone Number” can allocate partitions to a phone number.
2.4.
SMS Threshold
By default there is a threshold of 20 SMSes per day to a single phone number. You can increase or
decrease this threshold by sending a threshold command.
To increase the threshold to 50 SMSes you will use the following information:
Code – 1234 (a valid user code)
Command – Report
Extended Command – Threshold
Data – 50 (Number of SMSes) 073 917 0759
The SMS should look like this:
1234 report threshold 50
To decrease the threshold to 14 smses you will use the following information:
Code – 1234 (a valid user code)
Command – Report
Extended Command – Threshold
Data – 14 (Number of SMSes) 071 348 9467
The SMS should look like this:
1234 report threshold 14
