24
IDS X-Series Training v2.7
Programming Extended Locations
Sub-location Method
The sub-location method programs each sub-location within a location individually.
Entering data in the sub-location format:
1.
Enter Installer mode [#] [9][9][9][9] [*]
(This step is only required if you are not already in Installer mode)
2.
Then enter the location number followed by the [*] key
3.
Then enter the sub-location number followed by the [*] key
4.
Now enter the data value that needs to be in the location followed by the [*] key
5.
You can enter the next sub-location or press the [#] key to exit the location
6.
You can enter the next location or press the [#] key to exit Installer mode.
String Method
The string method programs all sub-locations within a location at once.
Entering data in the string format:
1.
Enter the location (E.g. [1] [*] )
2.
Now enter the complete string of data (E.g. [0][1] [0][2] [0][4] [0][4] [0][4] [1][0] [0]5] [0][3] [*])
3.
When the [*] key is pressed at the end of the string, you will be removed out of the location and the
data saved. If there is an error you will hear 3 error beeps, and will remain in the location to re-enter
the data.
Programming Bitmap Locations
A bitmapped location holds many options within a single location that have to be selected or deselected.
Bitmapped locations can also be sub-locations.
1.
Enter Installer mode [#] [9][9][9][9] [*]
(This step is only required if you are not already in Installer mode)
2.
Then press the keys that represent the location number followed by the [*] key
3.
Below is a diagram of what you may see when entering a bitmapped location or sub-location
4.
To enable or disable an option, press the number corresponding to the option, then press the [*] key,
the number will come on if it was off or go off if it was on.
5.
On the LCD keypad when the [*] key is pressed you will be taken to the option you have chosen. This
will show you the current value and if you want to then change the value, press the [*] key
(You can also scroll through the options using the scroll keys [>>] [<<])
6.
Continue with any other options you wish to change
7.
When complete, press the [#] key to exit the location or sub-location.
Review:
Location Type
Keys Presses
Entering the Installer Code [#] [9] [9] [9] [9] [*]
Standard Location
[Location Number] [*] [Value] [*]
Bitmap Location
[Location Number] [*] [Option] [*] [Option] [*]....[#]
Sub-location method
[Location Number] [*] [Sub-location Number] [*] [Value] [*]
String method
[Location number] [*] [all values to be entered] [*]
LED Keypad
LCD Keypad
Enabled option – LED number is on
Disabled option – LED number is off
Y – Option Enabled
N – Option Disabled
