IBM TotalStorage NAS Gateway 500, Руководство по обслуживанию

Страница: 317 / 471

Selecting Adapter Parameters allows you to view an adapter’s hardware address, as well as configure
network adapters that require setup. A menu similar to the following is displayed.
Attention: All network adapters in the system are listed in the adapter parameters menu.
Adapter Parameters
Device Slot Hardware Address
1. 10/100 Mbps Ethernet PCI Adapt Integrated:U0.1-P1/E2 0002554f50c3
2. Port 1 - IBM 2 PORT 10/100/100 6:U0.1-P2-I6/E1 00096bae31fc
3. Port 2 - IBM 2 PORT 10/100/100 6:U0.1-P2-I6/E2 00096bae31fd
4. 10/100 Mbps Ethernet PCI Adapt Integrated:U0.1-P1/E1 0002554f50c4
--------------------------------------------------------------------------------------------------
Navigation keys:
M = return to main menu
ESC key = return to previous screen
X = eXit System Management Services
--------------------------------------------------------------------------------------------------
Type the number of the menu item and press Enter or Select a Navigation key: _
Entering adapter parameters on these panels will automatically update the parameters on the ping test
panel.
Selecting an adapter on this menu displays configuration options for that adapter. The current setting is
indicated by <===.
Adapter Parameters
10/100 Mbps Ethernet PCI Adapter II
1. ethernet, 10, rj45, half
2. ethernet, 10, rj45, full
3. ethernet, 100, rj45, half
4. ethernet, 100, rj45, full
5. Continue with Ping
--------------------------------------------------------------------------------------------------
Navigation keys:
M = return to main menu
ESC key = return to previous screen
X = eXit System Management Services
--------------------------------------------------------------------------------------------------
Type the number of the menu item and press Enter or Select a Navigation key: _
To change the adapter parameters, select an option from the list.
Chapter 10. Using System Management Services
297