IBM TotalStorage NAS Gateway 500, Руководство по обслуживанию

Страница: 313 / 471

Chapter 10. Using System Management Services
Use the System Management Services menus to view information about your system, and to perform
tasks such as setting a password, changing the boot list, and setting the network parameters.
To start the System Management Services, do the following:
1. Restart the system.
2. Watch the console.
3. Look for the POST indicators memory, keyboard, network, scsi, speaker , which appear across the
bottom of the panel. Press the numeric 1 key after the word keyboard appears, and before the word
speaker appears.
For more information on the POST indicator words, refer to “POST indicators” on page 7.
After the System Management Services starts, the following panel is displayed:
Main Menu
1 Select Language
2 Change Password Options
3 View Error Log
4 Setup Remote IPL (Initial Program Load)
5 Change SCSI Settings
6 Select Console
7 Select Boot Options
--------------------------------------------------------------------------------------------------
Navigation keys:
X = eXit System Management Services
--------------------------------------------------------------------------------------------------
Type the number of the menu item and press Enter or Select a Navigation key: _
Note: The System Management Services can also be started using the Service Processor Boot Mode
Menu. See “System power control menu” on page 265.
293