IBM totalstorage 326, Справочник пользователя

Страница: 184 / 240

Hard Loop ID
If the Adapter Hard Loop ID setting is enabled, the adapter attempts to use
the ID specified in this setting. The default ID is 0.
Selectable boot settings
Though you can access this option from the Configuration Settings menu, do not
change the settings as booting from Fibre Channel is not supported.
Restore default settings
You can access this option from the Configuration Settings menu. It restores the
FAStT Host Adapter default settings.
Raw NVRAM data
This option displays the adapter’s NVRAM contents in hexadecimal format. This is a
QLogic troubleshooting tool; you cannot modify the data.
Advanced adapter settings
You can access this option from the Configuration Settings menu. The default
settings for the FAStT Host Adapter are listed in Table 34 and described in the
following paragraphs.
Table 34. Advanced adapter settings
Setting Options Default
Execution Throttle 1-256 256
Fast Command Posting Enabled or Disabled Enabled
>4 GByte Addressing Enabled or Disabled Disabled
LUNs per Target 0, 8, 16, 32, 64, 128, 256 0
Enable LIP Reset Yes or No No
Enable LIP Full Login Yes or No Yes
Enable Target Reset Yes or No Yes
Login Retry Count 0-255 30
Port Down Retry Count 0-255 30
Drivers Load RISC Code Enabled or Disabled Enabled
Enable Database Updates Yes or No No
Disable Database Load Yes or No No
IOCB Allocation 1-512 buffers 256 buffers
Extended Error Logging Enabled or Disabled Disabled
Execution Throttle
Specifies the maximum number of commands executing on any one port.
When a port’s execution throttle is reached, no new commands are
executed until the current command finishes executing. The valid options
for this setting are 1-256. The default (optimum) is 256.
Fast Command Posting
Decreases command execution time by minimizing the number of interrupts.
The default is Enabled.
172
Model 326 User’s Reference