IBM totalstorage 326, Справочник пользователя

Страница: 136 / 240

3. The cluster name appears in the left panel. Right-click the failed node machine
name and select Evict Node . The name of the failed node will be removed
from the left pane, and the cluster will now contain only the operational node of
the Model 326.
4. Attach a keyboard and monitor to the failed node.
5. Insert the Recovery Enablement Diskette into the diskette drive and place
Recovery CD 1 into the CD-ROM drive of the failed node.
Important
The Recovery Enablement Diskette enables the Model 326 to start from
the CD-ROM drive. You will not be able to restore the preload image from
the Recovery CD Set without first restarting the appliance using the
Recovery Enablement Diskette.
6. Restart the appliance.
7. If you installed additional processor memory on the appliance, the BIOS
configuration program will appear. Click Continue on the first screen, click
Continue again, click Exit Setup , and finally, click Yes, save and exit Setup .
8. When the diskette loads, you are prompted with a message which asks if you
want to proceed. Enter Y to proceed. If you enter N , you will be returned to a
command prompt.
9. The recovery process begins automatically. Follow the instructions provided by
the image restoration software, and the original manufacturing preload will be
restored. During the restoration of the preload, you are prompted to insert the
other recovery CDs into the CD-ROM drive. When the preload image is
restored, the Model 326 restarts automatically. You may now remove the
last-inserted CD (Recovery CD 4) from the CD-ROM drive.
10. If you have installed more processor memory, the BIOS configuration program
appears a second time. Click Continue on the first screen, then click
Continue again, then click Exit Setup , and finally, click Yes, save and exit
Setup . You can now detach the keyboard and display from the failed node and
allow the recovery process to complete automatically.
Important
v
Do not connect to or configure the node for at least 15 minutes after
system restart. After the node restarts, a series of configuration and
system preparation programs that finish configuring the node run
automatically. These programs must finish running before you use any
included applications (such as the IBM Advanced Appliance
Configuration Utility or the Terminal Services Client) to connect to or
configure the Model 326. This notice applies only to the first time the
Model 326 node is started after using the Recovery CD Set.
v
Logical Disk 0 will be configured to have a 6-GB NTFS boot partition.
Any other previously configured logical disk drives, as well as the
remainder of Logical Disk 0 (which, on the original hard disk drive of
the node, contains the Maintenance partition, but for a replacement
hard disk drive would not contain any other partitions), are unchanged.
11. Reinstall any software updates that are newer than those on the Recovery CD
Set.
124
Model 326 User’s Reference