IBM totalstorage 326, Справочник пользователя

Страница: 178 / 240

Table 31 shows the system error messages, their descriptions, and probable
causes.
Table 31. Hub diagnostic error messages
Message Description Probable cause Action
DIAG-BADINT Err#1030, 2030
[centralMemoryTest, cmiTest] Port received an interrupt
when not expecting one. ASIC failure 1
DIAG-BUS_TIMEOUT
Err#0BoF, 4040F
[portRegTest,
sramRetentionTest] ASIC register or ASIC
SRAM did not respond to
an ASIC data access. ASIC failure 1
DIAG-CAMSID Err#223C
[camTest] ASIC failed SID NO
translation test. ASIC failure 1
DIAG-CLEAR_ERR Err#0001 Port’s diag error flag (OK or
BAD) is cleared. Informational only None
required
DIAG-CMBISRF Err#1021
[centralMemoryTest] ASIC’s central memory
SRAMs did not complete
the BISR within the time-out
period. ASIC failure 1
DIAG-CMBISRTO Err#1020
[centralMemoryTest] ASIC’s central memory
SRAMs did not complete
the BISR within the time-out
period. ASIC failure 1
DIAG-CMERRPTN Err#102B
[centralMemoryTest] Error detected at the wrong
port. ASIC failure 1
DIAG-CMERRTYPE Err#102A
[centralMemoryTest] Port got the wrong CMEM
error type. ASIC failure 1
DIAG-CMICKSUM Err#2036
[cmiTest] CMI message received
failed bad checksum test. ASIC or system
board failure 1
DIAG-CMIDATA Err#2035
[cmiTest] CMI data received did not
match data transmitted. ASIC or system
board failure 1
DIAG-CMIINVCAP Err#2034
[cmiTest] Unintended ASIC
erroneously got CMI
capture flag. ASIC or system
board failure 1
DIAG-CMINOCAP Err#2033
[cmiTest] CMI intended receiver ASIC
failed to get CMI capture
flag. ASIC or system
board failure 2
DIAG-CMISA1 Err#2032
[cmiTest] An attempt to send a CMI
message from ASIC to
ASIC failed. ASIC failure 1
DIAG-CMNOBUF Err#1029
[centralMemoryTest] Port could not get any
buffer. ASIC failure 1
DIAG-DATA Err#266E, 306E
[portLoopbackTest,
crossPortTest] Payload received by port
did not match payload
transmitted. System board,
GBIC module,
embedded optic or
fiber cable failure 1
166
Model 326 User’s Reference