IBM totalstorage 326, Справочник пользователя

Страница: 180 / 240

Table 31. Hub diagnostic error messages (continued)
Message Description Probable cause Action
DIAG-MEMORY Err#0110
[ramTest] Data read from RAM
location did not match
previously written data into
same location. CPU RAM failure 1
DIAG-PORTABSENT
Err#2670, 3070, 3870
[portLoopbackTest,
crossPortTest, spinSilk] Port is not present. ASIC or system
board failure 1
DIAG-PORTDIED Err#265F,
305F, 385F
[portLoopbackTest,
crossPortTest, spinSilk] Port was in loopback mode
and then went inactive. ASIC, GBIC
module, embedded
optic or fiber cable
failure 2
DIAG-PORTSTOPPED
Err#3874 [spinSilk] Port is no longer
transmitting, as indicated by
the number of frames
transmitted counter being
stuck at N frames. ASIC, GBIC
module, embedded
optic or fiber cable
failure 2
DIAG-PORTWRONG
Err#3078 [crossPortTest] Frame erroneously received
by port M instead of the
intended port N. ASIC failure 1
DIAG-POST_SKIPPED Err#
0004 [managed hub
initialization] POST is skipped. Its
message recommended
that POST be executed. Informational only None
required
DIAG-REGERR Err#0B15,
0415 [portRegTest,
sramRetentionTest] Data read from ASIC
register or ASIC SRAM did
not match data previously
written into same location. ASIC failure 1
DIAG-REGERR_UNRST
Err#0B16, 0416 [portRegTest,
sramRetentionTest] Port failed to unreset. ASIC failure 1
DIAG-STATS Err#2660 - 2662,
3060 - 3062 [portLoopback
Test, crossPortTest] Port counter value did not
match the number of
frames actually transmitted.
Possible counters reporting:
v
FramesTx - number of
frames transmitted
v
FramesRx - number of
frames received
v
Cl3FrmRx - number of
class 3 frames received
ASIC, GBIC
module, embedded
optic or fiber cable
failure 2
DIAG-TIMEOUT Err#266F,
306F, 386F
[portLoopbackTest,
crossPortTest,
centralMemoryTest]
v
For portLoopbackTest
and crossPortTest: port
failed to receive frame
within time-out period.
v
For centralMemoryTest:
port failed to detect an
interrupt within the
timeout period.
ASIC, GBIC
module, embedded
optic or fiber cable
failure 2
DIAG-XMIT Err#2271, 2671,
3071, 3871
[portLoopbackTest,
crossPortTest, spinSilk,
camTest] Port failed to transmit
frame. ASIC failure 1
168
Model 326 User’s Reference