IBM Netfinity 3500, Руководство пользователя

Страница: 99 / 294

7. Check the instructions that come with the drive, or contact your
IBM reseller or IBM marketing representative to see if you need
to set any switches or jumpers on the drive, or if you need to
attach a tray to the drive.
What to do next?
Ÿ
To install a drive in bays 1 through bay 4, go to “Installing
or Removing Drives in Bays 1 through 4.”
Ÿ
To install a drive in bays 5 and 6, go to “Installing or
Removing Drives in Bays 5 and 6” on page 85.
Installing or Removing Drives in Bays 1 through 4
This section gives the procedure for installing a drive in bays 1
through 4. If you want to remove a drive, skip steps 2 through 4 on
page 82, and step 6 on page 82.
Before you begin:
Ÿ
Read “Electrical Safety” on page 54 and “Handling
Static-Sensitive Devices” on page 55.
Ÿ
Read “Preinstallation Steps (All Bays)” on page 76 and the
instructions that come with the option.
Ÿ
Read “Termination Requirements” on page 75.
Notes:
1. See “Drive Specifications” on page 71 for the drive types and
sizes that you can install in bays 1 through 4.
2. You might need to disconnect cables from drives that are
already installed in the server.
Chapter 4. Installing Options
81