IBM Netfinity 3500 Скачать руководство пользователя

Страница: 189 / 294

Troubleshooting

Expansion Enclosure
Problems

Action

The SCSI expansion
enclosure used to work,
but does not work now.

Verify that all SCSI expansion enclosure hardware and
cable connections are secure.

Verify that:

1. The cables for all external SCSI options are

connected correctly.

2. The last option in each SCSI chain, or the end of

the SCSI cable, is terminated correctly.

3. Any external SCSI option is turned on. You must

turn on an external SCSI option before turning on
the system.

For more information, see your SCSI and expansion
enclosure documentation.

If the SCSI expansion enclosure comes with its own test
instructions, use those instructions to test it. In
addition, test the power supply.

If the items above are correct and the test programs
found no problem, have the server and SCSI expansion
enclosure serviced.

The SCSI Repeater Card
used to work, but does
not work now.

Verify that all SCSI Repeater Card hardware and cable
connections are secure.

Verify that:

1. The cables for all external SCSI options are

connected correctly.

2. The last option in each SCSI chain, or the end of

the SCSI cable, is terminated correctly.

3. Any external SCSI option is turned on. You must

turn on an external SCSI option before turning on
the system.

For more information, see your SCSI documentation.

If the SCSI Repeater Card comes with its own test
instructions, use those instructions to test it.

If the items above are correct and the test programs
found no problem, have the server and SCSI Repeater
Card serviced.

Chapter 5. Solving Problems

171

Содержание Netfinity 3500







































































































































































































































































































Результаты поиска

Содержание Netfinity 3500

Отзывы:

Похожие инструкции для Netfinity 3500

Бренды по названию

Популярные бренды

IBM Netfinity 3500, Руководство пользователя

Результаты поиска

Содержание Netfinity 3500

Отзывы:

Похожие инструкции для Netfinity 3500

Бренды по названию

Популярные бренды