IBM Netfinity 3500, Руководство пользователя

Страница: 56 / 294

Using the Configuration/Setup Utility Program
switch to the ON position. (It might be helpful to use the end
of a small screwdriver to set the switch.)
Note: You must know the administrator password to change or
delete it.
4. Move the switch back to the OFF position after you have set,
changed, or deleted your password.
5. Replace the cover. Then, turn on the server.
Restricting Access to IDE Devices and Diskette Drives
The setting for the Secure IDE and Diskette Drives option controls
who has access to the IDE devices and diskette drives (user and
administrator, or administrator only). Your server comes with this
feature set to Enable, so that both the user and administrator have
access to the IDE devices and diskette drives.
To disable access to the IDE devices and diskette drives:
1. Select Secure IDE Devices and Diskette Drives from the
System Security menu; then, press Enter.
2. Select a device; then, press the Left Arrow (
←
) or Right Arrow
(
→
) key to toggle the entry to Disable.
Updating POST/BIOS Update over the Network
Using this option, the BIOS can be updated remotely from a
network server. If an administrator password is set, it does not have
to be entered from the server to access this function. Consult your
network administrator for information on setting up your network
server to perform POST and BIOS updates.
To access the POST/BIOS Update setting:
1. Select POST/BIOS Update.
2. Select Update POST/BIOS from network.
3. To enable update POST/BIOS over the network, select Enabled.
To disable, select Disabled.
38
Netfinity 3500 User's Handbook