IBM Netfinity 3500, Руководство пользователя

Страница: 104 / 294

Attention:
To ensure that the drive functions properly, do not overtighten
the screws.
5. Install the drive into the lower drive bracket so that the power
and signal cable connectors are facing the open side of the
server. Align the screw holes and insert two screws on each
side of the drive assembly near the bottom, as shown.
Attention:
a. If your server comes with a drive installed in bay 6, two
screws are attached to each side of the drive assembly.
If you remove a drive from bay 6 and install another drive
in that bay, use the screws that come with the preinstalled
drive.
b. If you are installing a drive in bay 5, turn the drive upside
down before you slide it into the bay. This ensures that the
drive connector will align with and attach properly to the
cable connector.
When you install the four screws that come with the drive,
attach them to the drive from the top.
86
Netfinity 3500 User's Handbook